Re: Barrel Plating Acid Copper
Has anyone had success in barrel plating bright acid copper? I have experience in acid copper rack plating, but have never seen this in a barrel application. If so, what are the operating parameters?
|
|
||
You are not logged in. Please login or register Announcement !Registration is Closed
Back to: Finishing Talk Forums - The Online Surface Finishing Community - Back to: Electroplating - You are here: Barrel Plating Acid Copper Barrel Plating Acid CopperPages 1 Posts [ 2 ]Re: Barrel Plating Acid CopperHas anyone had success in barrel plating bright acid copper? I have experience in acid copper rack plating, but have never seen this in a barrel application. If so, what are the operating parameters? Re: Barrel Plating Acid Copper[color="Blue"]This is not something that is very common as you may have found. However, I would suggest the reverse formula (from standard acid copper formulas)where the sulfuric acid is increased to 15 oz/gal to 20 oz/gal, with
Another thought, your strike prior to AC plate needs to be plated a little heaver in thickness as it may take slightly longer for the AC to plate on the part under barrel conditions.[/color] [color="Blue"]Gregg Romero
Posts [ 2 ] Pages 1 Back to: Finishing Talk Forums - The Online Surface Finishing Community - Back to: Electroplating - You are here: Barrel Plating Acid Copper |
About Us | Publication | Community | Advertise | Calendar | News Room | Contact | Account Manager | Sitemap © 2007- Finishing Talk- All Rights ReservedWeb Design, Web Development, & Web Hosting by Zurv |