veer

Topic: Electrolytic Nickel Electroplating on tungsten contact rivets

Can anybody help us in advising how to nickel electroplate components which are small & precision Tungsten Contact Rivets (size: About 4mm in Dia x 4mm length), Production Parts ( bulk quantity), Plating Thickness Desired: 1~ 2 micron, Finish: Preferably Dull, using Electrolytic Nickel Barrel route.

Presently, we are facing the problem of poor adhesion of nickle on tungsten base metal ( i.e peel-off). Upto 0.5~0.6 micron is achieved, but after that adhesion becomes difficult and plating layer peels-off.

With warm regards,

Vikas Jain

---------------

M/s Veer Electrometals
(An ISO 9001:2008 certified unit)
Hissar Road
Rohtak - 124001
(Haryana)
INDIA

Tel: +91-1262-270051, 270052, 324692
Fax: +91-1262-270057, 246027
Mobile: +91- 98120 09679
e-mail: veerind@vsnl.net