Topic: parts2clean and COROSAVE with Convincing Results, Even in Difficult Ti [ Started by doris schulz in Industry News : 0 replies ]

Leading Trade Fair for Cleaning within the Production Process and Maintenance Inspires Participants with Quality and Quantity

4350 visitors gathered information on offerings from 231 exhibitors at parts2clean and COROSAVE in Stuttgart from the 20th through the 22nd of October, 2009. The leading international trade fair for cleaning within the production process and maintenance was thus able to sustain the high levels of participation achieved last year with regard to both exhibitor and visitor numbers. The events, which are promoted by fairXperts GmbH, were not only convincing where quantity is concerned, but rather with regard to quality as well: Once again, the world’s most comprehensive offerings covering  …

Topic: plasmadust – metallization and coating of substrates - chemical-free a [ Started by doris schulz in Industry News : 0 replies ]

Whether temperature-sensitive plastics, metals, silicium disks, glass, foil or paper – for the first time, Reinhausen Plasma GmbH's patented plasmadust technology permits almost all materials to be metallized and coated without solvents and with extreme power efficiency. The basis of the coating procedure developed by this Regensburg (Germany) company is a combination process of cold.active plasma and micro/nano particles. Reinhausen Plasma is presenting this world first at the productronica in Munich from November 10 to 13, 2009.

The nanopowder plasma deposition technology – plasmadust for short – developed by Reinhausen Plasma combines plasma technology and micro or nanopowders to allow direct-coating processes completely without ch …

Topic: PaintExpo responds to the popular trend towards greater profitability, [ Started by doris schulz in Industry News : 0 replies ]

3rd leading international trade fair for industrial coating technology between 13 and 16 April 2010 in Karlsruhe (Germany)

Some seven months before the gates are due to open for the third time on PaintExpo at the exhibition centre in Karlsruhe, 208 companies have already booked their exhibition space. Among these are market and technological leaders in virtually every sector. Today, it is therefore already foreseeable that the leading international trade fair will have the most comprehensive offering on show for industrial coating technology in the world.

Topic: parts2clean - Over 220 exhibitors will be presenting solutions and kno [ Started by doris schulz in Industry News : 0 replies ]

Over 220 exhibitors from eleven countries will be represented at the 7th parts2clean, which will be held from October 20th to 22nd at the Stuttgart trade fair centre in Germany. Visitors can therefore expect to find a comprehensive range of solutions for satisfying the continually increasing demands on the cleanliness of parts and surfaces. The COROSAVE area also offers information on the topics of temporary corrosion protection, preservation and the packaging of cleaned parts.

“parts2clean has a strong market position, meaning that a great many previous exhibitors as well as new exhibitors have chosen to participa …

Topic: Process Optimisation through Temporary Corrosion Protection [ Started by doris schulz in Industry News : 0 replies ]

International Trade Fair for Corrosion Protection, Preservation and Packaging, 20 through 22 October 2009 in Stuttgart, Gernamy

Corrosion doesn’t just become a problem when parts are used, but rather already during manufacturing, storage and transport. For this reason, temporary corrosion protection plays an important role for quality and cost-optimised manufacturing. Measures which make is possible to protect components from corrosion in a requirements-oriented fashion will be presented at the COROSAVE international trade fair for corrosion protection, preservation and packaging at the Stuttgart Exhibition Centre from the 20th through the 22nd of October, 2009.

Go to forum: Industry News

Topic: Clean, pure and residue-free? – controlled surface and parts cleaning [ Started by doris schulz in Industry News : 0 replies ]

The quality and reliability of components depend to a great extent upon their cleanliness. This makes the inspection of cleaned surfaces and the monitoring of cleaning and rinsing baths indispensable constituents of quality and cost optimised cleaning processes in a great variety of industries. Effective solutions to these tasks will be presented by the exhibitors at parts2clean at the Stuttgart Exhibition Centre from the 20th through the 22nd of October, 2009. The issue of preserving the obtained degree of cleanliness will be elucidated at the COROSAVE international trade fair for corrosion protection, preservation and packaging, which will take place concurrently.

Go to forum: Industry News

Topic: Direct Inspection of Sheet Metal Blanks for Particulates, and Document [ Started by doris schulz in Article Submissions : 0 replies ]

With PartSens, acp GmbH makes it possible to directly measure and document particulate contamination on component surfaces for the first time ever. A new, enlarged measuring probe significantly expands the range of applications for this innovative inspection system, so that sheet metal blanks and auto body panels, for example, can be efficiently scrutinised for particulate cleanliness.

The new PartSens measuring probe has a measuring surface of 20 x 15 mm and allows for efficient, random sample testing of component surfaces for particulate cleanliness. Inspecting sheet metal blanks before press forming in  …

Topic: CO2 snow-jet cleaning – cost effective component cleanliness to meet i [ Started by doris schulz in Article Submissions : 0 replies ]

Mounting cleanliness requirements and the increasing complexity of metal parts call for innovative cleaning techniques – such as the purpose-built CO2 snow-jet cleaning machine made by acp GmbH. Integrated into production lines or as a stand-alone solution, this technology enables filmy and particulate contamination to be removed gently and efficiently in an environmentally-safe way.

Instead of CO2 pellets, the snow-jet cleaning technique developed by acp – advanced clean production GmbH uses liquid carbon dioxide as a jet medium. Fed from cylinders or tanks, it has an infinite shelf-life. In contrast with stand …

Topic: Cost Reduction through Effective Corrosion Protection [ Started by doris schulz in Industry News : 0 replies ]

1st International Trade Fair for Corrosion Protection, Preservation and Packaging, 20 through 22 October 2009 in Stuttgart, Germany

Corrosion is a natural process which causes immense damage every year in nearly all industry sectors. This process of change can only be counteracted if its outward manifestations and influence factors are known, and if corresponding measures are implemented on the basis of this knowledge. The COROSAVE international trade fair for corrosion protection, preservation and packaging is dedicated to this subject matter. It will be held concurrent to parts2clean, leading international trade fair for cleaning within the production process and maintenance, at the Stuttgart Exhibition Centre (Germany) from the 20

Topic: 1st International Congress for Suppliers and Users of Industrial Clean [ Started by doris schulz in Industry News : 0 replies ]

Cleaning within the Production Process: Worldwide Requirements, Technologies and Markets

Stricter requirements for component cleanliness, along with increasing cost pressure, are making themselves apparent in nearly all industry sectors around the globe. This is resulting in an immense, worldwide need for information regarding the various requirements and technologies in the various markets. For the first time ever, the parts2clean Congress provides users and suppliers of industrial cleaning technology a platform which offers answers, and allows for an exchange or information at the international level. The international Congress for Cleaning within the Production Process will take place at the Congress Center on the Stuttgart trade fair grounds as part of this ye …

Topic: Clean pressing rollers to give wheels an immaculate surface [ Started by doris schulz in Article Submissions : 0 replies ]

Wheels play an important role in the overall appearance of an automobile – especially when it comes to light alloy wheels to give a car racy lines. The manufacturer BBS has integrated CO2 snow jet cleaning into its flow forming process to achieve an optimum finish for its wheels which have become a legend on racing circuits and roads the world over.

Driven by the vision to construct lighter weight components for motorsport, in 1970 Heinrich Baumgartner and Klaus Brand founded BBS in Schiltach, Germany. To start with, the company made body parts out of plastic which helped fast cars become even faster. In 1972, it started manufacturing innovative three-component racing wheel rims. Even back then,

Go to forum: Article Submissions

Topic: Added Value with Optimised Cleaning Processes [ Started by doris schulz in Industry News : 0 replies ]

Whether manufacturing or maintenance is involved, the task of industrial cleaning is to assure the levels of cleanliness required for further processing or error-free, correct functioning. And ever stricter demands coupled with rising cost pressure are making cleaning processes which are matched to actual requirements absolutely essential. The 7th parts2clean will present solutions for cost-effective, ecologically efficient and reproducible parts cleaning in nearly all industries. The leading international trade fair for cleaning within the production process and maintenance will take place in Stuttgart (Germany) from the 20th through the 22nd of October, 2009. The COROSAVE international trade fair for corrosion protection, preservation and packaging will also be held concurrent to parts2clean this year.

Go to forum: Industry News

Topic: 7th Leading International Trade Fair for Cleaning within the Productio [ Started by doris schulz in Article Submissions : 0 replies ]

Where efficient parts cleanliness is concerned, parts2clean is plainly the world’s most highly regarded information and procurement platform for users. Nowhere else is such a broad-ranging, in-depth spectrum of solutions presented for exploiting the optimisation potential offered by the cleaning step in the manufacturing process. And this is resulting in growth for the leading international trade fair for cleaning within the production process and maintenance, even in economically difficult times. Nine months before the 7th parts2clean opens its doors, which will take place in Stuttgart from 20 to 22 October 2009, 80% of last year’s occupied exhibition floor space has already been booked. Within the framework of this year’s event – in addition to the time-tested expert forum – an international convention for industrial parts cleaning will a …

Topic: 3rd Leading International Trade Fair for Industrial Coatings Technolog [ Started by doris schulz in Article Submissions : 0 replies ]

Regardless of the currently tense situation which prevails in numerous economic sectors, more than 110 companies have already decided to participate at the 3rd PaintExpo from 13 through 16 April 2010 – roughly 14 months before the event opens its doors. This plainly indicates that the leading international trade fair for industrial coating technology is continuing to grow and is becoming more attractive for specialist visitors all over the world. Trade fair offerings which have been expanded to include foil laminating and thin-film/plasma technology, which are amongst today’s most current trends in painting technology, are also contributing to this situation.

“As a market leader in the field of surface finishing, PaintExpo is one of the most important trade fairs for us at Eisenmann. By registering early, we’re expressing our great interest and intend to contribute to the success and further growth of this event”, explains Gunter Connert from the General Finishing  …

Page [ 2 of 2 ] Posts by doris schulz [ 26 to 39 of 39 ]

Perform new search Topics by doris schulz

Pages   1 2

Back to: Finishing Talk Forums - The Online Surface Finishing Community - You are here: Posts by doris schulz


Forum quick jump menu

Atom Feed RSS Feed