Southern Metal Finishing

Re: How to buy a used rectifier

This article was published in the Feb 06 issue of Southern Metal Finishing.  If you would like register to receive our free newsletter and review our online archives please visit www.southernmetalfinishing.com

RECTIFIER CLINIC
Provided by www.drrectifier.com

TOPIC:    BUYING A USED RECTIFIER

There are many reasons that a coater may wish to purchase a used rectifier:  lower cost, immediate need, having a spare unit, etc.  Although the initial advantages may make this approach attractive, it is important to use the same care in purchasing a used rectifier as it is a new one.

Some of the considerations are:

•    Manufacturer  -  Is the manufacturer still in business?  Is the manufacturer located conveniently so that replacement parts and schematics are easily available?  Is the brand of rectifier the same as other units you have in your shop so that parts and circuit boards are compatible?  What is the reputation of the manufacturer within the industry?
•    Control  -  What type of control does the used rectifier have?  Is it tapswitch, powerstat, saturable core, or SCR?  Do you need to have either constant current or constant voltage for your process?  If so, will you be able to use a rectifier that cannot provide this capability?  Do you control your rectifiers with a PLC?  If so, you may not be able to control your rectifier unless it has the proper type of control for the voltage and amperage output.
•    Size  -  What kind of footprint does the rectifier have?  Will it fit in the space you have available or will you have to locate it farther from the line?  If it has to be relocated will the existing buswork fit or will new bussing be required?  Will there be a voltage drop if the bussing is extended that will affect the process?
•    Output Amperage  -  Does the used rectifier have sufficient amperage for your application?  Can it operate at full output without overheating?  If the used unit can put out more amperage can the existing buswork accommodate it?
•    Output Voltage  -  Does the unit have sufficient voltage for the process?  If you are using it as a spare can it operate in different applications?  If the maximum  output voltage is too high will it operate efficiently or without excessive ripple at lower voltages?
•    Cooling  -  Do you prefer air-cooled or water-cooled in your shop.  Can you accommodate the heated water generated in a water-cooled rectifier in your process or will you have to send it to a sewer and pay waste-treatment fees for the water?  If you put an air-cooled rectifier into a location with high humidity and chemical atmosphere will it be reliable?
•    Input Voltage and Amperage  -  Does the used rectifier have the same voltage requirements as those available in your facility?  If so, are you willing to install a step-up or step-down transformer to provide the proper voltage?  Will it draw more amperage than your wiring will accommodate?  If so, are you willing to add larger feed lines, fuses, and disconnects to accommodate the used rectifier?
•    Efficiency  -  Is the used rectifier as efficient as the unit it is replacing?  If not, you may draw more amperage to do the same amount of work and you may overload your existing wiring.
•    Ripple  -  Does the used rectifier have higher ripple than your process can accommodate?  If so, are you willing to buy a choke?  How will the additional price of a choke affect what the rectifier is worth to you?
•    Warranty  -  What sort of warranty is provided for the used rectifier?  Does it include both parts and labor?  Will the unit have to be sent back to the provider for warranty service or will the provider send a technician to perform the work.  Will you be responsible for travel costs?  Is the unit completely rebuilt which involves more removal and replacement of components than if it is reconditioned.  Or is the unit merely sold in “as-is” condition which means that you will assume more of the risk if the unit fails.  Is the dealer someone you have done business with before and is he or she reputable?
•    Age and Condition  -  Although age and condition are intertwined you are primarily interested in the condition of the rectifier.  If a unit has been kept in a clean environment and well-maintained it may be in better condition than one that is not as old but has not been well taken care of.  You will want to pay particular attention to the major components:  main transformer,  SCR stacks, diode stacks, tapswitches, powerstats, contactors, etc.  The ancillary components:  meters, relays, pots, stepdown transformers, and even firing boards can be replaced or repaired.  If the wiring is in a tangle, troubleshooting may be time consuming and expensive.  If possible, go to see the unit or failing that have the dealer send digital photos and nameplate data so you can confirm age and condition.
•    Price  -  What you are really looking for is value.  Are you paying too much for the type and make and condition of the rectifier you are buying?  If you are buying for bottom dollar you may be willing to take a unit that will require some work to recondition it if the major components are in good condition.  If you need a unit that works perfectly as soon as you apply power and hit the “start” button you may be willing to pay a little extra.

Some coaters buy used rectifiers without due consideration and wind up with more grief than relief if they need them to replace a line unit that fails.  Just as with the purchase of any other major piece of hardware in your operation, some initial foresight and effort may save you a lot of headaches in the long run.

This concludes the discussion on “Buying a Used Rectifier”.  If you have a particular topic you would like to be discussed please contact AESF.  For additional assistance please contact www.drrectifier.com for free assistance with your rectifier issues.

This article has been provided by JP Tech, Inc.